Shri JiPrecision Stamping Pvt. Ltd. Request a quote

We didn’t begin with scale.
We built it.

Electrical stampings and motor laminations for fans, BLDC motors, mixer grinders, power tools, pumps and transformers. Designed, tooled, stamped, die-cast and annealed under one roof in Ghaziabad, India, since 1994, for leading OEM manufacturers of pumps, motors and appliances.

Progressive die stamping of a motor lamination A steel strip moves through five die stations: pilot holes, rotor slots, rotor blank, stator slots and stator blank, ending as an auto-stacked stator core. Pilot Rotor slots Rotor blank Stator slots Stator blank Auto-stacked core
Installed capacity
24,000 MT / year
Press range
25–360 tonnes
Progressive tooling
Up to 500 mm
Rotor and stator designs
200+
Certified
ISO 9001
ISO 14001

Six product families, one tool room behind them

Every lamination we sell comes off a tool we designed and built ourselves. If your geometry isn’t listed, send the drawing: anything within our 500 mm progressive tooling range can be developed.

BLDC motor stampings

Stator and rotor laminations from 30 to 300 mm OD, supplied as auto-stacked, interlocked cores.

View specifications

Ceiling fan stampings

12- and 14-pole stator and rotor sets for induction ceiling fans, with aluminium die-cast rotors when required.

Get a quote

Mixer grinder stampings

Stator and armature sets for universal motors in mixer grinders, in V-slot and U-slot designs.

Get a quote

Power tool stampings

Compact, high-speed armature and field laminations, rotor OD 35 to 60 mm.

Get a quote

Submersible pump stampings

Tall stacks of 80 to 150 mm for borewell and oil-field submersible motors.

Get a quote

Transformer EI laminations

EI and UT laminations in CRNO / CRNGO, 0.50 mm, for transformers, stabilisers and chokes.

Get a quote

We also make laminations for table and pedestal fans, washing machines, RO and water pumps, and cooler motors.

From tool room to finished component

Many stamping suppliers buy their tools and send secondary work outside. We keep the whole chain in one place, so one team answers for your part from first drawing to dispatch.

  1. Your requirement

    A drawing, a sample or a performance target. We review material, geometry and volumes.

  2. R&D and tool design

    Drawing review, strip layout and progressive or compound tool design, up to 500 mm.

  3. Tool room

    Dies built and maintained on Fanuc wire-cut, EDM and precision grinders in our own tool room, running since 2014.

  4. Material inspection

    Prime steel from TATA, JSW, POSCO and CSC, checked against mill certificates for grade, width and thickness.

  5. Stamping

    High-speed presses from 25 to 360 tonnes, including Schuler and AIDA, with carbide dies and automatic coil feeding.

  6. Die casting and Hi-PerM annealing

    Aluminium die-cast rotors and in-house Hi-PerM annealing when your design needs them.

  7. Inspection

    Four quality gates, watt-loss and hardness testing, and dimensional checks against your drawing.

  8. Dispatch

    Rust-protected packing with VCI paper and poly liners, shipped across India and to export markets.

Fewer suppliers to manage

Tooling, stamping, die casting and annealing come from one source, with one point of contact.

Tooling you don’t have to chase

Because we build and maintain our own tools, design changes and die maintenance stay inside our plant.

Simpler sourcing from India

Export buyers deal with a single manufacturer for the complete lamination, with the cost base of Indian production.

From 100 square yards to two manufacturing units

Shri Ji began in 1994 with a small workshop and hand-operated presses. Every year since, we have put money back into presses, tooling, automation and people.

Today a second generation of leadership is adding modern systems and data-driven manufacturing to three decades of shop-floor experience.

  1. 1994

    We start in a workshop of about 100 square yards, running manual presses of around 10 tonnes.

  2. Year after year

    Steady reinvestment: bigger presses, more automation, new rotor and stator designs and better manufacturing systems.

  3. 2014

    We open our in-house tool room with Japanese wire-cut technology, so we can design and build our own dies.

  4. Today

    Two units on about 1 lakh square yards (about 8.4 hectares) of land, high-speed presses up to 360 tonnes, more than 200 rotor and stator designs, and 24,000 MT of installed annual capacity.

Precision

Every lamination made to drawing, every stack checked.

Reliability

Consistent quality and supply our customers can plan around.

Unity

Customers, suppliers and our team working as one, for decades.

Progress

Continuous investment in technology, systems and people.

The machines and checks behind every lamination

A lamination is only as accurate as the tool that punched it and the gauge that checked it. Both are in our own hands, and every order passes four quality gates.

  1. Incoming

    Mill test certificates, coil thickness, grade and surface verified before use.

  2. First piece

    First-piece approval against the drawing on every set-up.

  3. In-process

    Patrol checks on dimensions, burr height and stacking during the run.

  4. Final

    Stack height, OD and ID, slot geometry and visual checks before packing.



Tool room

  • Wire-cut EDMFanuc, Japan
  • Surface grinders6, including a German grinder for lengths up to 4,000 mm
  • Cylindrical grinderHMT
  • Lathes2, imported
  • Milling machines2
  • EDM hole drilling, radial drill and drilling machinesIn-house
  • Overhead cranesFor die handling

Quality lab

  • Watt-loss (core-loss) testerMagnetic performance
  • Hardness testerMaterial and annealing checks
  • Height gauge, bore gauges (ID and OD)Dimensions
  • Digital verniers, micrometers, go/no-go gauges, feeler gaugesShop-floor checks
  • Dial indicators on granite surface plate, bench centresFlatness and run-out

Prime electrical steel from leading mills

TATAJSWPOSCOCSC
ISO 9001:2015Quality management
ISO 14001:2015Environmental management

Supplying leading OEMs in India and abroad

  • India
  • United Arab Emirates
  • Africa
  • Nepal
  • Bangladesh

We supply leading OEM manufacturers of pumps, motors and appliances. Share your drawing and target volumes. We reply with a technical review and a quotation, and you can reach our team directly on WhatsApp.

Questions buyers ask us

What does Shri Ji Precision Stamping manufacture?

Shri Ji Precision Stamping manufactures electrical stampings and motor laminations for ceiling, BLDC, table and pedestal fans, mixer grinders, power tools, washing machines, RO and submersible pumps and cooler motors, plus EI and UT laminations for transformers, stabilisers and chokes. We also design and build the stamping tools in-house.

Which materials do you stamp?

We stamp CRNGO / CRNO electrical steel and CRCA in the grade the customer specifies, sourced as prime material from TATA, JSW, POSCO and CSC, and we supply Hi-PerM annealed CRCA stampings from our in-house annealing plant.

Can you make laminations to my drawing?

Yes. Our engineers review your drawing, plan the strip layout and design the tool in-house. Our progressive tooling handles laminations up to 500 mm, and we already hold more than 200 rotor and stator designs.

What is Hi-PerM annealing?

Hi-PerM is a heat-treatment annealing process applied to CRCA prime stampings. It reduces the watt loss caused by stamping and improves the efficiency of the finished motor. Shri Ji runs its own Hi-PerM annealing plant.

What is your production capacity?

Shri Ji has an installed annual capacity of 24,000 MT across two manufacturing units, with high-speed presses from 25 to 360 tonnes.

Where is your factory and do you export?

Our factory is at E-71 and E-72, Tronica City, Ghaziabad, Uttar Pradesh 201103, India, in the Delhi NCR region. We supply OEMs across India and export to the UAE, African countries, Nepal and Bangladesh.

Send your drawing or request a quote

Tell us what you need and our team will get back to you. Drawings are used only to prepare your quotation.

Send your drawing Request a quote WhatsApp