BLDC motor stampings
Stator and rotor laminations for BLDC ceiling fans, pumps and other brushless motors, from 30 to 300 mm outside diameter. Stamped on progressive tools we build ourselves and supplied as auto-stacked, interlocked cores.
Specifications
| Products | BLDC stator laminations and rotor laminations; auto-stacked, interlocked stator and rotor cores |
|---|---|
| Stator outside diameter | 30 mm to 300 mm |
| Materials | CRNGO electrical steel and CRCA in the grade your design specifies; Hi-PerM annealed CRCA |
| Material sources | Prime steel from TATA, JSW, POSCO and CSC, with mill test certificates |
| Thickness | 0.50 mm |
| Core assembly | Auto-stacked and interlocked in the die, for stators and rotors |
| Secondary processes | Hi-PerM annealing in our own plant; aluminium die casting where required |
| Tooling | Progressive tools designed and built in-house, laminations up to 500 mm |
| Presses | High-speed presses from 25 to 360 tonnes, including Schuler and AIDA, with carbide dies |
| Tolerances and burr | As per your drawing and applicable ISO standards, checked with dimensional gauges |
| Inspection | Watt-loss (core-loss) testing, hardness testing, dimensional gauging |
| Quality systems | ISO 9001:2015 and ISO 14001:2015 |
Standard BLDC fan stators, ready to quote
These designs already have tools in our tool room. Stack height is made to your requirement.
| Design | Stator OD | Bore | Slots | Material |
|---|---|---|---|---|
| 18-slot BLDC fan stator | 132.00 mm | 16.50 mm | 18 | CRCA / CRNO / Hi-PerM |
| 12-slot BLDC fan stator | 131.80 mm | 16.50 mm | 12 | CRCA / CRNO / Hi-PerM |
Why the stator decides a BLDC fan’s star rating
Since January 2023 every ceiling fan sold in India must carry a BEE star label, and under the current standard a 5-star rating generally needs a BLDC motor. As fan makers move their ranges to BLDC, the stator lamination becomes one of the parts that most affects efficiency, noise and batch-to-batch consistency.
Material grade
Electrical steel grades are rated by core loss. A lower-loss grade wastes less energy as heat in every rotation, which shows up directly in input watts.
Burr and flatness
Burrs reduce the stacking factor, meaning less steel in the same stack height, and can bridge neighbouring laminations. Sharp, well-maintained dies keep burr low.
Stress from stamping
Punching deforms the steel near every cut edge and raises its losses. Annealing after stamping relieves that stress, which is what our Hi-PerM process does for CRCA.
Stack consistency
Interlocking in the die gives stacks with consistent height and slot alignment, which makes winding faster and motor performance more uniform.
Hi-PerM annealing, in-house
Hi-PerM is a heat-treatment annealing process applied to CRCA prime stampings. It reduces the watt loss introduced by stamping and improves the efficiency of the finished motor. Because the annealing plant sits inside our factory, your stampings go from press to furnace to inspection without leaving our control.
Where our BLDC stampings go
BLDC ceiling fans
Outer-rotor stator cores for energy-efficient ceiling fans, including standard 12- and 18-slot designs.
Pumps
Stator and rotor laminations for BLDC pump motors.
Other BLDC motors
Any brushless motor lamination from 30 to 300 mm OD, built to your drawing.
How a BLDC project runs
Share your drawing
Upload it below or send it on WhatsApp, with volumes and material.
Engineering review
We check geometry, plan the strip layout and confirm the stacking method.
Tool design and build
The progressive tool is designed and made in our own tool room.
Samples
First-off stacks are inspected and sent to you for approval.
Production
Series production with annealing or die casting as specified, then dispatch.
What to send for a quick quote
The more of this we have, the faster and more accurate the quotation.
- Lamination drawing (DXF, DWG, PDF or STEP)
- Material and grade, or the efficiency target
- Thickness
- Stack height and stack tolerance
- Loose laminations or interlocked cores
- Annealing or die casting needs
- Annual quantity and first-order quantity
- Delivery location
BLDC stamping questions
What sizes of BLDC stator laminations does Shri Ji make?
Shri Ji makes BLDC stator laminations from 30 mm to 300 mm outside diameter, together with the matching rotor laminations.
Which materials are used for your BLDC motor stampings?
We stamp BLDC laminations in CRNGO electrical steel and CRCA in the grade your design specifies, and we also supply Hi-PerM annealed CRCA. Standard thickness is 0.50 mm.
Do you supply loose laminations or stacked cores?
We supply auto-stacked, interlocked stator and rotor cores, stacked inside the progressive die, so you receive cores ready for winding or assembly.
What is Hi-PerM annealing and why does it matter for BLDC motors?
Hi-PerM is a heat-treatment annealing process for CRCA prime stampings. Stamping stresses the steel near every cut edge and raises watt loss; Hi-PerM annealing reduces that loss and improves motor efficiency. We run the process in our own plant.
Can you die-cast aluminium rotors as well?
Yes. Aluminium die casting is done in-house whenever a design needs a die-cast rotor, so stamping and casting stay with one supplier.
What tolerances and burr height do you work to?
We work to the tolerances and burr limits on your drawing and to the applicable ISO standards, and we check them with dimensional gauges and record the results.
Can you develop a new BLDC lamination from my drawing?
Yes. Our engineers design the progressive tool and our tool room builds it with Fanuc wire-cut and precision grinding. We already hold more than 200 rotor and stator designs.
Do you have standard BLDC fan stator designs?
Yes. We have tools for an 18-slot BLDC fan stator with 132.00 mm OD and a 12-slot stator with 131.80 mm OD, both with a 16.50 mm bore, in CRCA, CRNO or Hi-PerM, with stack height made to your requirement.
Do you supply BLDC stampings outside India?
Yes. Besides OEMs across India, we export to the UAE, African countries, Nepal and Bangladesh.
Send your drawing or request a quote
Tell us what you need and our team will get back to you. Drawings are used only to prepare your quotation.