Shri JiPrecision Stamping Pvt. Ltd. Request a quote

BLDC motor stampings

Stator and rotor laminations for BLDC ceiling fans, pumps and other brushless motors, from 30 to 300 mm outside diameter. Stamped on progressive tools we build ourselves and supplied as auto-stacked, interlocked cores.

Stator OD 30–300 mm
18-slot outer-rotor stator lamination, illustrative

Specifications

ProductsBLDC stator laminations and rotor laminations; auto-stacked, interlocked stator and rotor cores
Stator outside diameter30 mm to 300 mm
MaterialsCRNGO electrical steel and CRCA in the grade your design specifies; Hi-PerM annealed CRCA
Material sourcesPrime steel from TATA, JSW, POSCO and CSC, with mill test certificates
Thickness0.50 mm
Core assemblyAuto-stacked and interlocked in the die, for stators and rotors
Secondary processesHi-PerM annealing in our own plant; aluminium die casting where required
ToolingProgressive tools designed and built in-house, laminations up to 500 mm
PressesHigh-speed presses from 25 to 360 tonnes, including Schuler and AIDA, with carbide dies
Tolerances and burrAs per your drawing and applicable ISO standards, checked with dimensional gauges
InspectionWatt-loss (core-loss) testing, hardness testing, dimensional gauging
Quality systemsISO 9001:2015 and ISO 14001:2015

Standard BLDC fan stators, ready to quote

These designs already have tools in our tool room. Stack height is made to your requirement.

DesignStator ODBoreSlotsMaterial
18-slot BLDC fan stator132.00 mm16.50 mm18CRCA / CRNO / Hi-PerM
12-slot BLDC fan stator131.80 mm16.50 mm12CRCA / CRNO / Hi-PerM

Why the stator decides a BLDC fan’s star rating

Since January 2023 every ceiling fan sold in India must carry a BEE star label, and under the current standard a 5-star rating generally needs a BLDC motor. As fan makers move their ranges to BLDC, the stator lamination becomes one of the parts that most affects efficiency, noise and batch-to-batch consistency.

Material grade

Electrical steel grades are rated by core loss. A lower-loss grade wastes less energy as heat in every rotation, which shows up directly in input watts.

Burr and flatness

Burrs reduce the stacking factor, meaning less steel in the same stack height, and can bridge neighbouring laminations. Sharp, well-maintained dies keep burr low.

Stress from stamping

Punching deforms the steel near every cut edge and raises its losses. Annealing after stamping relieves that stress, which is what our Hi-PerM process does for CRCA.

Stack consistency

Interlocking in the die gives stacks with consistent height and slot alignment, which makes winding faster and motor performance more uniform.

Hi-PerM annealing, in-house

Hi-PerM is a heat-treatment annealing process applied to CRCA prime stampings. It reduces the watt loss introduced by stamping and improves the efficiency of the finished motor. Because the annealing plant sits inside our factory, your stampings go from press to furnace to inspection without leaving our control.

Where our BLDC stampings go

BLDC ceiling fans

Outer-rotor stator cores for energy-efficient ceiling fans, including standard 12- and 18-slot designs.

Pumps

Stator and rotor laminations for BLDC pump motors.

Other BLDC motors

Any brushless motor lamination from 30 to 300 mm OD, built to your drawing.

How a BLDC project runs

  1. Share your drawing

    Upload it below or send it on WhatsApp, with volumes and material.

  2. Engineering review

    We check geometry, plan the strip layout and confirm the stacking method.

  3. Tool design and build

    The progressive tool is designed and made in our own tool room.

  4. Samples

    First-off stacks are inspected and sent to you for approval.

  5. Production

    Series production with annealing or die casting as specified, then dispatch.

What to send for a quick quote

The more of this we have, the faster and more accurate the quotation.

  • Lamination drawing (DXF, DWG, PDF or STEP)
  • Material and grade, or the efficiency target
  • Thickness
  • Stack height and stack tolerance
  • Loose laminations or interlocked cores
  • Annealing or die casting needs
  • Annual quantity and first-order quantity
  • Delivery location

BLDC stamping questions

What sizes of BLDC stator laminations does Shri Ji make?

Shri Ji makes BLDC stator laminations from 30 mm to 300 mm outside diameter, together with the matching rotor laminations.

Which materials are used for your BLDC motor stampings?

We stamp BLDC laminations in CRNGO electrical steel and CRCA in the grade your design specifies, and we also supply Hi-PerM annealed CRCA. Standard thickness is 0.50 mm.

Do you supply loose laminations or stacked cores?

We supply auto-stacked, interlocked stator and rotor cores, stacked inside the progressive die, so you receive cores ready for winding or assembly.

What is Hi-PerM annealing and why does it matter for BLDC motors?

Hi-PerM is a heat-treatment annealing process for CRCA prime stampings. Stamping stresses the steel near every cut edge and raises watt loss; Hi-PerM annealing reduces that loss and improves motor efficiency. We run the process in our own plant.

Can you die-cast aluminium rotors as well?

Yes. Aluminium die casting is done in-house whenever a design needs a die-cast rotor, so stamping and casting stay with one supplier.

What tolerances and burr height do you work to?

We work to the tolerances and burr limits on your drawing and to the applicable ISO standards, and we check them with dimensional gauges and record the results.

Can you develop a new BLDC lamination from my drawing?

Yes. Our engineers design the progressive tool and our tool room builds it with Fanuc wire-cut and precision grinding. We already hold more than 200 rotor and stator designs.

Do you have standard BLDC fan stator designs?

Yes. We have tools for an 18-slot BLDC fan stator with 132.00 mm OD and a 12-slot stator with 131.80 mm OD, both with a 16.50 mm bore, in CRCA, CRNO or Hi-PerM, with stack height made to your requirement.

Do you supply BLDC stampings outside India?

Yes. Besides OEMs across India, we export to the UAE, African countries, Nepal and Bangladesh.

Send your drawing or request a quote

Tell us what you need and our team will get back to you. Drawings are used only to prepare your quotation.

Send your drawing Request a quote WhatsApp